Direct answer: 11kV usually describes the nominal network voltage, while 12kV is a common equipment rated-voltage class. Therefore, correctly specified 12kV switchgear is commonly selected for an 11kV system, subject to the project standard, insulation level and utility requirements.
Key Points
- Nominal system voltage and equipment rated voltage are different terms
- Confirm power-frequency and lightning-impulse insulation levels
- Check earthing system, frequency and maximum operating voltage
- Use the project specification and SLD for final selection
Selection Guidance
For an 11kV project, do not select equipment from the voltage label alone. Confirm rated current, short-time withstand current, peak withstand current, functional units, cable interfaces, protection relay and installation conditions.
Information Required for Engineering Review
Provide the nominal voltage, highest system voltage, rated current, short-circuit level and duration, frequency, application, SLD, BOQ, protection requirements, cable details, installation conditions and quantity. Qiangchi will confirm the project-specific configuration and document requirements.
Engineering Documents and FAT
Available project support may include configuration review, technical clarification, GA drawing, typical SLD coordination, component schedule, routine-test documentation, FAT planning and export packing. Final scope is confirmed according to the approved specification.
Frequently Asked Questions
Can the final selection be made from the voltage and current alone?
No. The SLD, fault level, functional units, protection, cables and service conditions must also be reviewed.
Are all configurations the same size?
No. Dimensions depend on voltage class, functional units, cable arrangement and optional devices. Use the approved GA drawing.
Can Qiangchi review an EPC specification?
Yes. Send the SLD, BOQ and specification for a project-specific technical review.
What is checked during FAT?
The FAT scope may include visual and mechanical checks, wiring verification, interlock checks, functional tests and routine electrical tests according to the agreed inspection plan.
Which standards apply?
The applicable IEC or project standard is confirmed during technical clarification. Project-specific requirements must be stated before design approval.
Where can I compare related products?
Review QCL-12 RMU, XGN15 AIS RMU or use the Medium Voltage Product Finder.
Send Your SLD for Review
Qiangchi will evaluate the voltage, rated current, fault level, functional units, drawings, testing and delivery documentation.
Confirm the Correct Voltage-Class Equipment
System voltage alone does not complete product selection. Confirm rated voltage, insulation level, rated current, short-circuit current and duration, frequency, functional units, cable arrangement, application and required standard before quotation.
View QCL-12 RMU · Selection Guides · Technical Downloads · Request a Quote · WhatsApp Engineering Team